Soft Silicone Gel Tape & Chips
Download This Page As PDF
Download This Page As PDF
Company Registration Number 3832422 : Registered in England. Registered Office : Marcom House, 1-2 Steam Mill Lane, Great Yarmouth, Norfolk, NR31 0HP : VAT No. GB740 7652 32

Ultra Soft High Damping Silicone Gel

Designed for Light Component Isolation

High Performance at 2mm+ Thick

Very Low Compression Set

High performance in narrow space enclosures.
Provides shock, vibration protection and improved audio fidelity.
Ideal for handheld applications, fragile components, audio components.
Ultra soft silicone gel sheet for reducing structureborne vibrations and shock absorption. High shock absorption Ideal for broad temperature range, extreme shock and vibration environments. Adhesive one side, simply cut and attach. Low compression set. Soft enough to have enough warp for high damping and shock absorbing performance. An egg dropped from 20 meter high does not break on a sheet of this gel. This soft gel absorbs micro and low frequency vibrations not eliminated by rubbers and other damping materials. The gel also absorbs shocks and is soft enough to have enough warp for high damping and shock absorbing performance.Outstanding shock absorption characteristics by means of dispersing impact three dimensionally due to its unique molecular structure.

Low temperature dependency with stable performance from -40°C up to 100°C with adhesive. Without adhesive -40c to 200c. Performs in any weather. Excellent chemical resistance. Low compression set with performance staying the same even after repeated use. Contains nothing harmful. Environment friendly. Toxic free when burned. Compress by up to 33% for optimum performance. Various sizes available below. Can also be supplied in custom sizes and without adhesive.

We have soft gel sheet and grommets made of the same gel material. Also see our soft silicone free gel sheet

Gel Chip Dimensions
Tape
Part No.
Size (mm)
T-1
1000 X 10 X 1
T-2
1000 X 20 X 1
T-3
1000 X 10 X 2
T-4
1000 X 20 X 2
T-5
1000 X 10 X 3
T-6
1000 X 20 X 3
Chip (25 units per sheet)
Part No.
Size (mm)
C-1
10 X 10 X 3
C-2
10 X 10 X 5
C-3
15 X 15 X 3
C-4
15 X 15 X 5
C-5
15 X 15 X 10
C-6
20 X 20 X 3
C-7
20 X 20 X 5
C-8
20 X 20 X 10
Gel Type/Unit
7
Remark
Appearance
translucent
-
Hardness
Needlepenetration (1/10mm)(1)
100
JIS K 2207
Asker C(2)
-
SRIS 0101
Shore A equivalent (appx)
10
-
Specific gravity
1.06
-
Tensile strength
0.23
JIS K 6251
Elongation%
480
JIS K 6251
Young modulus (kPa)
37.5
-
Specific heat (j/g.K)
1.51
DSC
Thermal conductivity (W/m.K)
0.20
-
Specific volume resistance ratio (Ohm-cm)
2.9*1014
JIS K 6911
Dielectric breakdown strength (kV/mm)
16.3
JIS K 2110
Chemical resistance
Toluene
X
JIS K 6258 room temp
x 168h
Acetone
X
Methanol
O
Distilled H20
O
Fuel
X
Lubricant
X
NaCl (10%)
O
HCl (10%)
O
NaOH(5%)
O
Normal temperature range (©C) without adhesive
-
-40 to 200
-
Normal temperature range (©C) with adhesive (appx)
-
-40 to 100
-
(1) The needling depth into the gel represents the hardness
(2) Rubber Hardness Meter. Hardness is represented by rebounding distance when the needle contacts the gel surface