Mounting Directions

There are four possible mounting configurations depending upon space constraints.
Attention ! Over the size of the radius R ( see detail X ) can be adjusted the resistance to mount and remount the fan with sleeves.

Hole Cut Out 1	Hole Cut Out 2	Hole Cut Out 3	Hole Cut Out 4
First pull the sleeve over the flange of the fan, then place the four mushroom shaped pegs over the holes B and then push through the mounting plate (a little lubricant would assist).	First place the four mushroom shaped pegs through the 45° slots of the mounting plate and push into the holes C2. Now put the fan into the sleeve and pull the corners over the fan flanges.	First pull the sleeve over the fan flange. Then place the four mushroom shaped pegs  through the larger holes C1 of the mounting plate and rotate the fan to lock into holes C2.	First pull the sleeve over the fan flange, then place the four mushroom shaped pegs  through the lager holes C1 of the mounting plate and slide   the fan to lock into the holes C2.

For further assistance on mounting techniques please contact us.